EDM is a big family of styles, from house and techno to dubstep, trap, and future bass. They sound different, but almost every EDM track is built the same way: drums, bass, chords, and a hook, arranged so the energy builds and drops. Learn that process once, and you can use it in any genre and any DAW. This guide walks you through it step by step, from an empty project to a finished track you can share.
What You Need to Start
You can start with very little. Plenty of released tracks were made on a laptop and a pair of headphones.
- A computer: any recent laptop or desktop will run a beginner project. See how to choose a computer for music production if you are buying one.
- A DAW: the program where you make the music. FL Studio, Ableton Live, Logic Pro, and Bitwig are all popular for EDM, and most have a free trial. Our guide to choosing a DAW for electronic music compares them.
- Headphones or monitors: you need to hear your low end clearly. Start with studio headphones, then add studio monitors later.
- Sounds: your DAW comes with synths and samples. Add a few free VST plugins and a small sample pack, and you have everything you need.
A MIDI keyboard helps but is not required. You can draw every note with the mouse. For a full setup, see how to build a home studio.
Pick a Genre and a Tempo
Choose one style for your first track and set the tempo before you write anything. The tempo shapes the drum pattern and the whole feel of the track.
| Style | Typical tempo | Drum feel |
|---|---|---|
| Deep house | 118 to 124 BPM | Four-on-the-floor kick, swung hats |
| Tech house | 124 to 128 BPM | Four-on-the-floor, busy percussion |
| Big room and progressive house | 126 to 130 BPM | Four on the floor, huge build and drop |
| Techno | 125 to 140 BPM | Four on the floor, driving and repetitive |
| Trap | 130 to 150 BPM | Half-time drums, fast hi-hat rolls, 808 bass |
| Dubstep | 140 BPM | Half-time, snare on beat 3 |
| Future bass | 130 to 160 BPM | Half-time, big chord stabs |
| Drum and bass | 170 to 176 BPM | Fast breakbeats, heavy bass |
Pick a key at the same time. Minor keys such as A minor or F minor are the most common in EDM because they sound darker and more emotional. Writing everything in one key from the start means your bass, chords, and lead will fit together.
Step 1: Sketch Your Idea in 8 Bars
Most unfinished tracks die because the producer spends hours on one sound. Instead, make a rough 8-bar loop with four parts before you polish anything:
- Drums: kick, clap or snare, and hats.
- Bass: a simple line that follows the chords.
- Chords: two to four chords that set the mood.
- Hook: a short lead melody, a vocal chop, or a catchy sound.
Give yourself 30 to 60 minutes for this sketch. If the loop makes you want to keep listening, it is worth finishing. If not, save it and start another. This loop becomes the drop of your track, and everything else is built around it.
Step 2: Program the Drums
Drums decide the genre more than any other part. There are two basic patterns to learn.
Four on the floor
Used in house, techno, big room, and trance. The kick hits on every beat, the clap or snare on beats 2 and 4, and an open hat on the offbeat between each kick. Add closed hats on the 1/16 notes and a little swing to keep it from sounding stiff. Our guide on how to make house music shows the full pattern on a grid.
Half time
Used in trap, dubstep, and future bass. The tempo is fast, but the snare lands on beat 3 of the bar, so the track feels half as fast. Kicks are placed more freely, and hi-hats often roll in fast triplets. See how to make trap beats for a step-by-step pattern.
Whatever the style, choose your kick carefully. It is the loudest and most important sound in the track. Pick one that sounds right on its own before you build anything else on top.
Step 3: Write the Chords and Bass
You do not need to read music to write good chords. A simple four-chord loop in one key is enough for most EDM. In A minor, try Am, F, C, G. It is one of the most used progressions in dance music because it works with almost any melody.
- Play the chords as long pads for a deep or emotional feel, or as short stabs for energy.
- Write the bass by playing the root note of each chord one or two octaves lower. Start with that, then add movement.
- Use sidechain compression so the bass and pads duck each time the kick hits. It keeps the low end clean and gives EDM its pumping feel.
- Keep the sub bass mono and below about 100 Hz. Everything above that can be wider.
Stuck on chords? MIDI files give you a working progression to drag in and change. Our MIDI Vault EDM1 has 400 MIDI files of melodies, chord progressions, and basslines, all labeled with key and BPM.
Step 4: Add the Hook
The hook is the part people remember. In EDM, it is usually a synth lead, a vocal chop, or a distinctive sound in the drop. Keep it short, two to four bars, and repeat it. Use notes from the chords underneath so it always fits.
Most EDM leads come from software synths such as Serum, Vital, Spire, or Sylenth1. If you are not sure where to start, read our guide to the best synth plugins for EDM. Presets are a fast way to find a sound; then you can tweak the filter and envelope until it fits your track. See the best Serum presets for free and paid options.
Step 5: Arrange the Track
Now turn your 8 bar loop into a full track. EDM is arranged in blocks of 8, 16 or 32 bars, and something should change at the start of each block. Copy your loop across the timeline, then remove parts to create the sections below.
| Section | Length | What happens |
|---|---|---|
| Intro | 16 to 32 bars | Mostly drums, so a DJ can mix in |
| Breakdown | 16 bars | Kick out, chords and hook come in softly |
| Build up | 8 to 16 bars | Rising energy: snare rolls, risers, a filter opening |
| Drop | 16 to 32 bars | Your full 8 bar loop, all parts playing |
| Second breakdown and build | 16 to 32 bars | Same idea, with a small change |
| Second drop | 16 to 32 bars | A variation: new bass rhythm, extra layer, or a switch-up |
| Outro | 16 to 32 bars | Back to drums so a DJ can mix out |
Transitions glue the sections together. A riser before the drop, an impact on the first beat of the drop, and a downlifter at the end of a section make the changes feel intentional. OPTIMAL FX has 262 risers, impacts, sweeps and fills made for exactly this.
Step 6: Mix Your Track
Mixing is balancing all the parts so each one can be heard. Keep it simple at first:
- Gain staging: keep each track peaking well below 0 dB, and leave at least 6 dB of headroom on the master.
- Volume balance: set the kick first, then the bass, then everything else around them. Most of a good mix is just the right volume levels.
- EQ: cut the low end from every sound that does not need it, such as hats, pads and leads. Cut before you boost.
- Compression: use it to control loud peaks and add punch to drums, not on everything by default.
- Space: send reverb and delay from a bus instead of putting them on each track, and keep the kick and bass dry and centered.
- Reference: play a released track in the same style at the same volume and compare.
Your room affects what you hear more than your speakers do. If your mixes sound different everywhere else, read about treating your home studio.
Step 7: Master and Export
Mastering makes the finished mix louder and more consistent across systems. A simple chain is enough to start: a gentle EQ, a light compressor or glue compressor, and a limiter at the end.
- Set the limiter ceiling to about minus 1 dB true peak so the track does not distort after it is converted to MP3 or streaming formats.
- Streaming services turn loud tracks down to a common level, often around minus 14 LUFS, so pushing your master very loud gains little there. Club tracks are usually mastered louder.
- Listen on headphones, laptop speakers, a phone, and a car before you call it done.
- Export a 24-bit WAV for distribution, and keep a copy of the project and stems.
Step 8: Finish and Release
Finished tracks teach you more than perfect loops. Set a deadline, for example, one track every two weeks, and release or share it when the time is up. Upload to SoundCloud for feedback, or use a distributor to put it on Spotify and Apple Music. Fill in the metadata properly: title, artist name, genre, and artwork.
Using samples in a release is normal. Check the license of every pack first. Our guide to royalty-free samples explains what you can and cannot do.
Common Beginner Mistakes
- Spending a whole session on one sound instead of sketching the full idea.
- Too many parts playing at once, so nothing stands out.
- A kick and bass that clash because there is no sidechain or EQ space.
- Mixing too loud for too long. Take breaks and mix at a low, comfortable volume.
- A drop that is the same loop for 64 bars with no change.
- Never finishing. A finished average track is worth more than ten great loops.
For more helpful habits, read our music production tips for beginners.
Go Further With the EDM Production Toolbox
This guide covers the process in one page. For the full method in one place, the EDM Production Toolbox Third Edition is Asi Vidal’s 48-page guide to making electronic music, rewritten for 2026. It takes you from your first loop to a released track:
- Setting up your studio, templates, and a free plugin toolkit
- The 4-loop sketch, arranging and smooth transitions
- Music theory shortcuts: keys, scales and chord progressions that work in EDM
- Drums, bass and sound design, including groove, sidechain and layering
- Mixing and mastering, with loudness targets and printable checklists
- AI tools for producers, finishing tracks and releasing your music
- A 30-day plan to take you from beginner to finished tracks
It works with any DAW and comes as a PDF you can read on any device. Get the EDM Production Toolbox. Want to try it first? The shorter Second Edition is free.
Sounds to Practice With
- $1 EDM Tool Kit: 83 key-labeled drums, basses, stabs, FX and loops for house, big room and techno. A cheap way to fill your first project with sounds.
- EDM 2 Sample Pack: five big room construction kits with loops, one-shots, and MIDI. Open one and study how a finished drop is built.
- Key Sounds Vol.1: 198 tuned EDM drums, basses, synths and FX, each labelled with its key.
- EDM Bundle: five packs covering big room, tech house, deep house, future house and techno.
Questions
How long does it take to learn to make EDM?
You can finish a simple track in your first few weeks. Making tracks that sound like the releases you love usually takes a year or more of regular practice. Finishing many tracks is the fastest way to improve.
Do I need to know music theory?
No, but a little helps. Learn one minor scale and a few chord progressions, and you can write most EDM. Many DAWs also have scale and chord tools that keep you in key.
Which DAW is best for EDM?
The one you will actually learn. FL Studio and Ableton Live are the most common choices for EDM, but every major DAW can make a professional track. Compare them in our DAW guide.
Is it cheating to use samples and presets?
No. Most professional producers use sample packs and presets every day. What matters is how you choose, edit, and arrange them.
Can I make EDM on a laptop?
Yes. A laptop, a DAW, and good headphones are enough to make and release full tracks.
Latest From the Blog
The Best Serum Presets in 2026: 9 Free and Paid Packs Compared
Nine Serum preset packs compared, free and paid: counts, genres, Serum 2 notes, how each is gated and who it suits. From a 372 patch Rhino Star pack to community libraries and premium bass packs.
The Best 808 Samples: 9 Free and Paid Packs for Trap and Hip Hop (2026)
Nine places to get 808 samples, most of them free: tuned one shots, long sub tails, distorted hits and kits with MIDI. What’s inside each, how it’s gated and how to use the 808 once you have it.
The 10 Best Deep House Sample Packs in 2026 (Paid and Free)
Ten deep house sample packs compared, from a $1 construction kit to Zenhiser’s premium collections. Contents, prices, who each suits and what is missing.